Our new HI Volume RO Unit is designed for the high end user requiring large amounts of water in a short time.

We believe these to be the best value for money there is for an industrial quality purification system. Directly comparable in quality, capacity and efficiency to the ‘big name’ systems.

Benefits of these systems include:

  • Compact Design
  • Ideal for hard water areas
  • Free Standing – does not have to be wall mounted
  • Very easy to use and maintain
  • Comprises of off the shelf filters and housings – can be replaced with filters from other manufacturers.
  • Easily portable
  • Very good production rates from high quality membranes
  • Includes a 6.5 litre deionisation unit to make 100% pure water – 000 TDS
  • High quality water output
  • Cost effective from day one
  • Manufactured by us in-house
  • Fully assembled and ready to work out the box

Each 2400 GPD unit includes the following:

  • 2 x 20″ Reverse Osmosis Prefilters and Housings
  • 1 x 40″ HF4 high quality Reverse Osmosis Membrane and Stainless Steel Housing
  • Mains powered, IP55 rated booster pump
  • Direct on Line starter to stop/start pump and provide overload protection
  • 1 x Glycerine FiIlled Pressure Gauge
  • 1 x 6″ x 18″ (6.5 Litre) Deionisation Unit filled with Tulsion brand Deionisation Resin
  • All metal powder coated stand and frame

As with all RO unit, to get a good production rate and waste to pure ratio, good inlet water pressure is required. If your mains water pressure is not high enough a booster pump can be fitted which will allow the membrane to run at it’s peak performance. The booster pumps we supply are all continuously rated meaning there is no ‘down time’ to allow the pump to cool. The booster pump we supply with this system is an industrial quality 230V vane pump matched specifically in terms of flow rate and pressure to the task at hand. It is also IP55 rated meaning that is is safe to use in an environment where water splashes are likely to occur.An option is available to substitute the DOL starter with a float switch operated set of controls, if required please tick the option box.

We cannot stress enough the benefits of installing a booster pump in your RO Unit – Pure water production increases massively, a waste to pure ratio of 1:1 can often be achieved and the output TDS of the membrane drops significantly thereby increasing the life of your DI resin.

We have included options for both HF4 and HF5 membranes. These are both very highly regarded in the water purification industry however the HF5 is able to produce similar volumes to the HF4 at very low water pressure.

HF4 40″ – 10910 Litres per Day (2400 GPD) @ 100psi

HF5 40″ – 10910  Litres per Day (2400 GPD) @ 80psi

Feel free to contact us on 0333 1234 365 (8am – 5pm Mon – Fri) if you would like to speak to a member of our team who would be more than happy to explain further anything you see here or answer any questions you may have.

Also available in 20″ unit.

Additional information

Weight75 kg


There are no reviews yet.

Be the first to review “2400 GPD High Volume Reverse Osmosis System 40″ HF4 With Large Booster Pump”

Your email address will not be published. Required fields are marked *