Our new high volume reverse osmosis systems are designed for the high end user requiring large amounts of water in a short time.

We believe these to be the best value for money there is for an industrial quality purification system. Directly comparable in quality, capacity and efficiency to the ‘big name’ systems.

Benefits of these systems include:

  • Compact Design
  • Ideal for hard water areas
  • Very easy to use and maintain
  • Comprises of off the shelf filters and housings – can be replaced with filters from other manufacturers.
  • Easily portable
  • Very good production rates from high quality membranes
  • Includes a 6.5 litre deionisation unit to make 100% pure water – 000 TDS
  • High quality water output
  • Cost effective from day one
  • Manufactured by us in-house
  • Fully assembled and ready to work out the box

Each 2400 GPD unit includes the following:

  • 2 x 20″ Reverse Osmosis Prefilters and Housings
  • 1 x 40″ HF4 high quality Reverse Osmosis Membrane and Stainless Steel Housing – Upgrade from the previous Plastic housing which is shown in the picture
  • Choice to add industrial standard, mains powered, IP55 rated booster pump
  • 1 x Glycerine FiIlled Pressure Gauge
  • 1 x 6″ x 18″ (6.5 Litre) Deionisation Unit filled with Tulsion brand Deionisation Resin
  • All metal powder coated frame

As with all reverse osmosis systems to get a good production rate and waste to pure ratio, good inlet water pressure is required. If your mains water pressure is not high enough a booster pump can be fitted which will allow the membrane to run at it’s peak performance. The booster pumps we supply are all continuously rated meaning there is no ‘down time’ to allow the pump to cool. The booster pump we supply with this system is an industrial quality 230V vane pump matched specifically in terms of flow rate and pressure to the task at hand. It is also IP55 rated meaning that is is safe to use in an environment where water splashes are likely to occur.

We cannot stress enough the benefits of installing a booster pump in your RO system – Pure water production increases massively, a waste to pure ratio of 1:1 can often be achieved and the output TDS of the membrane drops significantly thereby increasing the life of your DI resin.

We have included options for both HF4 and HF5 membranes. These are both very highly regarded in the water purification industry however the HF5 is able to produce similar volumes to the HF4 at very low water pressure.

HF4 40″ – 10910 Litres per Day (2400 GPD) @ 100psi

HF5 40″ – 10910 Litres per Day (2400 GPD) @ 80psi

Feel free to contact us on 0333 1234 365 (8am – 5pm Mon – Fri) if you would like to speak to a member of our team who would be more than happy to explain further anything you see here or answer any questions you may have.


Additional information

Weight100 kg


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.