Description

Faster and Easier to Use

The simple beauty of the Phoenix is the clamping system. This has been designed completely with the end user in mind. We’ve looked into how these poles work on a day to day basis and how we can improve your working life.

 

One Finger Operation

By having a one finger flip action on the clamp levers, the user can work faster than ever before. Sideways (transverse) clamps have a certain awkwardness when being used as the thumb, which tends to be the main finger to use to open the clamps, operates in an unnatural way.

The Phoenix clamp is designed to flip open in the quickest and easiest way that is natural to the hand and can be used by any finger so you wont know how you ever managed before! Faster and easier for you and your workforce.

 

Anti Pinch

Considering how long water fed poles have been in use, no one has actually addressed the issues the day to day user experiences. Ask any window cleaner the one thing that annoys them about pure water cleaning and it will be the clamps pinching the skin should the pole section move down a bit sharpish. Time and time again this, results in a nasty pinch on the operators hand. Not anymore, Facelift, through design, have eliminated the problem – but it doesn’t stop there.

 

Nuts for Fine Tuning

Unlike some poles, over tightening the nut at the side of the clamp will not affect the wear of the sections. Where a lot of clamps rub continually against the pole sections when extending and collapsing the pole, the Phoenix clamp springs open on release, freeing up the pole so it runs smoothly with minimum wear on the section.

 

Levers

One nuisance of sideways (transverse) clamps is that they catch on sills, gutters, etc and pop open which causes the section to slide down and the user has to re-extend his pole. Time consuming and annoying all in one.

The Phoenix levers have been specially designed to bounce over ledges, etc and prevent this nuisance from happening. Another first in water fed pole design.

 

The Red One

The red lever at the top of the pole is for the quick release adapter, the red colouring is basically there to remind you NOT to open the clamp unless removing adapter or any optional extras.

The Material

The Pro is made with a very high quality carbon composite material giving the pole extra strength, rigidity and lightness over glassfibre without the full carbon price tag.

 

Phoenix Pro 22 Pole Specification:

  • Reach*:  25ft
  • Weight:  1350g
  • No. of sections:  5
  • Diameter:  32mm
  • Collapsed Length:  4’10”

*Reach Assumes an extra three feet gained by holding the pole at waist height

An angle adaptor is not included.

Additional information

Weight10 kg

Reviews

There are no reviews yet.

Be the first to review “Phoenix 22 Pro 25ft Reach”

Your email address will not be published. Required fields are marked *